2011 WATER QUALITY REPORT
This report
contains important information regarding the water quality in our water system.
The source of our water is groundwater. Our groundwater is drawn from the
Mississippian aquifer(s).
Our water quality
testing shows the following results:
|
CONTAMINANT |
MCLG |
MCL |
DETECTED LEVEL |
DATE SAMPLED |
|
VIOLATION |
SOURCE |
|
|
Lead (ppb) |
0 |
|
10 w/ one sample site exceeding the MCL |
2011 |
0 to 126 |
No |
Corrosion of household plumbing systems; erosion of natural
deposits |
|
|
Chlorine (ppm) |
MRDLG =4.0 |
MRDL=4.0 |
1.42 |
RAA 2011 |
.91 – 1.82 |
No |
Water additive used
to control microbes |
|
|
Nitrate [as N] (ppm) |
10 |
10 |
1.26 |
2011 |
N/A |
No |
Runoff from fertilizer use; Leaching from septic tanks, sewage;
Erosion of natural deposits |
|
|
TTHM (ppb) [Total trihalomethanes] |
N/A |
80 |
21.00 |
|
N/A |
No |
By-products of drinking water disinfection |
|
|
Copper (ppm) |
1.3 |
|
1.14 w/ one sample site exceeding the MCL |
2011 |
0.18 to 1.51 |
No |
Corrosion of
household plumbing systems;
Erosion of natural deposits |
|
|
Sodium (ppm) |
N/A |
N/A |
12 |
|
N/A |
No |
Erosion of natural deposits; Added to water during treatment
process |
|
|
Haloacetic
Acids (HAA5) (ppb) |
N/A |
60 |
9.00 |
|
N/A |
No |
By-products of drinking water disinfection |
|
|
Combined radium (pCi/L) |
0 |
5 |
1.3 |
|
N/A |
No |
Erosion of natural deposits |
|
Note: Contaminants with
dates indicate results from the most recent testing done in accordance with
regulations.
DEFINITIONS
·
Maximum
Contaminant Level (MCL) – The highest level of a contaminant that is allowed in
drinking water. MCLs
are set as close to the MCLGs as feasible using the
best available treatment technology.
·
Maximum Contaminant
Level Goal (MCLG) -- The level of a contaminant in drinking water below which
there is no known or expected risk to health.
MCLGs allow for a margin of safety.
·
ppb -- parts per billion.
·
ppm -- parts
per million.
·
pCi/L – picocuries per liter
·
N/A – Not applicable
·
ND -- Not detected
·
RAA – Running Annual
Average
·
Maximum
Residual Disinfectant Level Goal (MRDLG) - The level of a drinking water
disinfectant below which there is no known or expected risk to health. MRDLGs do not
reflect the benefits of the use of disinfectants to control microbial
contaminants.
·
Maximum Residual Disinfectant Level (MRDL) - The highest
level of a disinfectant allowed in drinking water. There is convincing evidence that addition of
a disinfectant is necessary for control of microbial contaminants.
·
EPA – Environmental Protection Agency
·
CDC – Center for Disease Control
·
IDRN – Iowa Department of Natural Resources
GENERAL INFORMATION
Drinking water,
including bottled water, may reasonably be expected to contain at least small
amounts of some contaminants. The
presence of contaminants does not necessarily indicate that water posed a
health risk. More information about
contaminants or potential health effects can be obtained by calling the
Environmental Protection Agency’s Safe Drinking Water Hotline (800-426-4791).
Some people may be more vulnerable to contaminants in drinking water than
the general population. Immuno-compromised persons such as persons with cancer
undergoing chemotherapy, persons who have undergone organ transplants, people
with HIV/AIDS or other immune system disorders, some elderly, and infants can
be particularly at risk from infections. These people should seek advice about
drinking water from their health care providers. EPA/CDC guidelines on appropriate means to
lessen the risk of infection by Cryptosporidium
and other microbial contaminants are available from the Safe Drinking Water
Hotline (800-426-4791).
If present, elevated levels of lead can cause serious health problems,
especially for pregnant women and young children. Lead in drinking water is primarily from
materials and components associated with service lines and home plumbing. The City of
No contaminate violations
in 2011.
ADDITIONAL HEALTH INFORMATION
Infants and young children
are typically more vulnerable to lead in drinking water than the general
population. It is possible that lead
levels at your home may be higher than at other homes in the community as a
result of materials used in your home’s plumbing. If you are concerned about elevated lead
levels in your home’s water, you may wish to have your water tested and flush
your tap for 30 seconds to 2 minutes before using tap water. Additional information is available from the
Safe Drinking Water Hotline (800-426-4791).
SOURCE WATER ASSESSMENT INFORMATION
The City of
OTHER INFORMATION
Our water utility is
making every effort to protect the water system from potential security
threats. You, as customers, can also
help. If you see any suspicious activity
near the water tower, treatment plant, wells, or fire hydrants, please contact
us at
The City of
Please note: This report will not be mailed to individual
customers. If you would like a copy of
the report, you may pick up a copy at City Hall,
For questions regarding this information, please contact Water/Wastewater
Superintendent Nathan Hovick at
Decisions regarding the water system are made at the City Council
meetings held on the 1st and 3rd Wednesdays of each month
at